Oster OD15, Instruction Manual

Page: 12 / 16

English - 4
Turning unit on and off
1. Plug unit into an appropriate electrical outlet. All lights will go on and after 1 second go
out. The unit will beep 3 times.
2. Press the power button to start the unit. The power light will go on. The unit
will beep one time and go to the continuous dehumidifying mode .
3. To turn the unit off, press the power button again.
Continuous dehumidifying
To set the unit to operate continuously, turn the unit on or press the mode button until
the continuous dehumidifying light goes on.
The unit will operate in high speed, at continuous dehumidifying.
Automatic dehumidfying
1. The unit has an automatic dehumidifying and a quiet automatic dehumidifying
function. Press the mode button until the automatic dehumidifying light or
quiet automatic dehumidifying light goes on.
2. In automatic dehumidifying mode, the unit will monitor the relative humidity of the
environment and adjust its functionality accordingly, cycling on and off to maintain your
desired comfort level.
3. In quiet automatic dehumidifying mode, the unit will operate as in the automatic
dehumidifying mode but at low speed.
4. The default humidity level is set at 60% relative humidity (rh). Press the humidity
control button until you reach your desired humidity level. Please refer to the humidity
control instructions below for additional operating instructions.
Using the timer
Once the unit is powered on and an operating mode is selected, press the timer button
, choosing 2, 4 or 8 hours. To turn timer off, press timer button until all timer lights go
out.
Humidity control
When the unit starts, the humidity level of the environment will be shown on the display.
1. For automatic dehumidifying or quiet automatic dehumidifying modes, press the
humidity control button to select the desired humidity level. The control allows you to
adjust level in 5% intervals from 40% to 80%.
2. If the unit humidity level sensor detects humidity levels in the environment that are
lower than the selected humidity level, the compressor will shut off and the fan will
work on low speed. The humidity level of the environment must be higher than the
humidity level selected in order for the unit to start operating again.
Automatic defrosting
If the temperature of the unit drops down to -1ºc or lower, the unit’s temperature sensor
will set the compressor to dehumidify for 30 minutes and then shut off automatically. The
fan will keep running to defrost.
OPERATING