-5-
-6-
OPERATING INSTRUCTIONS
Filling with water:
1. Remove the water tank from the unit.
2. Turn the water tank cap counterclockwise to open it.
3. Fill it with water.
4. Place cap back onto water tank and tighten it by screwing it clockwise.
5. Place the water tank back in the unit ensuring it fits tightly in place.
6. Your garment steamer is now ready to use.
How to use:
1. Make sure the water tank is filled with water.
2. Hang the garment you wish to steam on the unit hanger.
3. Plug it into the appropriate electrical outlet. Make sure cord is unwrapped from
bottom of the unit.
4. Turn the On/Off switch to On “I”.
5. Leave the nozzle for about 60 seconds or in its holder until it starts to release steam.
6. Remove nozzle from holder and apply it closely moving it along the areas you wish
to steam.
7. Repeat the process as many times until you achieve the desired result.
8. When you are done, place nozzle back in its holder (see the “ASSEMBLING THE
GARMENT STEAMER” section) to ensure it is placed properly in the rest position.
9. Turn on/off switch to the off “O” position.
10. Unplug unit and let it cool.
NOTE: Switch off the unit when the water tank gets empty.
CAUTION: THE UNIT RELEASES HOT STEAM SO PLEASE MAKE SURE TO
HANDLE THE NOZZLE CAREFULLY AND AWAY FROM ANY BODY PARTS AND
OTHER PEOPLE AND OBJECTS. BE PARTICULARLY CAREFUL TO NOT POINT THE
NOZZLE TO YOUR FACE.
DO NOT OPERATE UNIT WITHOUT HAVING THE HOSE PROPERLY CONNECTED
TO THE RECEPTACLE LOCATED ON THE UNIT. IT CAN CAUSE BURNS DUE TO
HOT WATER. TO CONNECT THE HOSE, INSERT AND TWIST INTO THE COLLAR AS
PER BELOW ILLUSTRATIONS:
CAUTION: WE RECOMMEND USING PERSONAL HANGER WHEN STEAMING
GARMENTS THAT CANNOT BE OPENED SUCH AS POLOS AND T-SHIRTS TO
AVOID COVERING NOZZLE HOLDER COMPLICATING NOZZLE AND GARMENT
REMOVAL. (TURN OFF THE UNIT WHEN REMOVING THE GARMENT FROM
THE BUILT IN OR PERSONAL HANGER. BE VERY CAREFUL WHEN REMOVING
GARMENTS FROM THE BUILT- IN HANGER OR PERSONAL HANGER AS THE
NOZZLE FACEPLATE AND BRISTLE BRUSH ARE VERY HOT).
CLEANING AND MAINTENANCE
1. Unplug unit from electrical outlet and let it cool down completely.
2. Do not immerse unit or any of its parts in water. The only part that can be washed
with water is the water tank and its cap (if needed).
3. Remove water tank and dispose of water.
4. Remove any lint that might get trapped on the bristle brush.
5. Wipe unit and nozzle faceplate with a damp smooth cloth
6. To dispose of any remaining water inside the unit, remove the rod and the hose and
take unit to the sink. Remove the water tank. Remove drainage plug located under
the unit by unscrewing it counterclockwise and dispose of any remaining water
through the drain. CAUTION: ENSURE UNIT IS UNPLUGGED.
7. Please do not pour any flavor into the water.
8. After using the appliance, please place it to some dry and dust free location.
The scale from tap water may build-up on the major parts of the steamer over time.
Descale your steamer regularly by the following steps:
1. Fill the water tank with solution of 700ml of white vinegar and 700ml of water.
2. Switch on the steamer to operate and let the steam to release.
3. Empty the vinegar solution from the water tank and rinse with clean water.
4. Fill the water tank with clean water and then operate normally.
GCSTGS5011-049_15EM3.indd 5-6
5/20/15 11:19 AM
