background image

PREPARING FOR FIRST TIME USE

• When using the iron for the first time, test it on a piece of old cloth to be sure that

  the soleplate and the water reservoir are clean.

• It is possible that the iron will discharge some smoke or give off a slight odor

  during its first usage. This is due to the initial heating of the materials used. This

  is completely normal and will stop shortly afterwards.
• When not ironing, always have the steam select switch turned to the closed position.

Set the steam iron in an upright position and insert the plug into the wall electrical outlet.

For Steam Iron Model GCSTBS4901

1. The indicator light will go on.

2. Select the desired temperature on the temperature control dial.

3. Once the selected temperature is reached, the indicator light will go off and you

    can begin to iron. The indicator light will be on every time the iron is heating.

    The light will turn on and off from time to time while you are ironing since the

    thermostat automatically maintains the soleplate at the same temperature.

    

Another important feature of your steam iron is the 360º swivel cord, which prevents

tangling and allows for easy use by both right and left handed people.

USING YOUR APPLIANCE

English - 4

Summary of Contents for GCSTBS4901L





















Reviews: