www.oster.com
8
www.oster.com
9
How to Chop Using the Large Work Bowl
NOTE: Make sure the unit is turned OFF (O) and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for more
than 3 minutes at a time.
1 Lock the large bowl onto base.
(See “How to assemble the large bowl”)
2 Grasp the chopping blade by its stem
and slide it onto the center post
(Figure 9a).
3 Place food into bowl.
4 Lock cover onto bowl.
(See “How to Lock the cover”)
5 Lock the Food Chute Lid.
(See “How to Lock the Food Chute Lid”).
6 Plug the cord into an electric outlet.
Use the Food Guide to prepare food
for chopping.
7 Turn the knob to the desired speed position for continuous processing or the
PULSE position for short processing tasks. When using the PULSE setting, hold
the knob in the PULSE position for about 2-3 seconds at a time, check results
and repeat if desired.
8 When finished processing, release the knob, or if you were using continuous 1,
2 or 3 position, turn the knob to the OFF (O) position and allow the chopping
blade to stop rotating.
9 Twist the cover towards the UNLOCK
mark to remove lid.
10 Hold the Chopping Blade by its stem and remove. Unlock the bowl by turning it
clockwise towards the UNLOCK
mark, and lift off. Empty the processed food.
NOTE: Chopping Blade is very sharp, use caution when handling.
Figure 9
How to Chop Using the Small Work Bowl
(Do not use slice/shred disc with small work bowl.)
NOTE: Make sure the unit is turned OFF (O) and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for more
than 3 minutes at a time.
1 Lock the large bowl onto base.
(See “How to assemble the large bowl”)
2 Insert Small work bowl into large work bowl and twist inner bowl until it is
seated into the large work bowl.
3 Grasp the small chopping blade by its stem and slide it onto the center post.
4 Place food into bowl.
5 Lock cover onto bowl. (See “How to Lock the cover”)
6 Lock the Food Chute Lid. (See “How to Lock the Food Chute Lid”).
7 Plug the cord into an electric outlet.
8 Turn the knob to the desired speed position for continuous processing or
the PULSE position for short processing tasks. When using the PULSE setting,
hold the knob in the PULSE position for about 2-3 seconds at a time, check
results and repeat is desired.
9 When finished processing, release the knob, or if you were using a continuous
speed, turn the knob to the OFF (O) position and allow the chopping blade to
stop rotating.
10 Twist the Lid towards the UNLOCK
mark to remove.
11 Hold the Chopping Blade by its stem and remove. Lift small work bowl out of
the larger work bowl. Empty processed food.
NOTE: When using chopping blade use slower speeds to control size of chopped
food. Chopping Blade is very sharp, use caution when handling.
