Oster 124612, User Manual

Page: 12 / 20

Using Your Kettle’ s Keep Warm Feature
(Model 5965 only)
This kettle incorporates a keep-warm function, which maintains the
water at a pre-determined temperature after the boiling cycle. The Keep
Warm feature is ideal for family breakfasts, commercial breaks and
cooking.
• The Keep W arm function can be switched on before, during or after
boiling. The Keep W arm feature can also be turned off at any time if
no longer required.
1. Operate the kettle following the instructions contained in the “Using
Your Electric Kettle” section. After filling the kettle and replacing it
onto the power base, boil water , then press the Keep W arm button.
The Keep W arm button will illuminate when turned on.
2. When activated, the Keep W arm function will maintain the water
temperature at approximately 70˚C after boiling.
The Keep Warm feature will not boil the water .
3. T o turn the Keep W arm feature off, simply press the Keep W arm On/
Off button again. The light in the button will turn off, showing that
the feature is no longer operating.
NOTE: Never allow the kettle to boil dry or drop below the minimum
mark. With the kettle filled to the maximum level (1.5 litres) the kettle
can be left with the Keep Warm function on for up to 12 hours.
IF THE KETTLE DOES BOIL DRY
If the kettle is operated in accordance with instructions for use, it is
unlikely that the kettle will boil dry . However , in the event that the
kettle does boil dry , it is protected by a boil dry , fail-safe device which
will switch the kettle off automatically on sensing a boil dry situation
and keep it switched off until the kettle is refilled with at least the
minimum amount of water . Always allow the kettle to cool for half an
hour before reuse if the kettle has boiled dry .
If the kettle boils dry when the Keep W arm feature is activated, the
kettle body will remain warm until switched off and allowed to cool.
6