background image

Description

OmniConverter GPoE+/S

10/100/1000BASE-T to 1000BASE-X or 100BASE-X Fiber Media 

Converter with PoE+

Standard Compliances

IEEE 802.3, 

IEEE 802.3af (15.40 watts max), 

IEEE 802.3at (30 watts max)

PoE Supported Modes

IEEE Alternate A (Alt A), IEEE Alternate B (Alt B), 
Cisco Legacy and High Cap

Environmental

RoHS, WEEE and REACH

Frame Size

Up to 10,240 bytes

Port Types

Copper:

     

10/100/1000BASE-T (RJ-45)

Fiber:        100BASE-X (SFP)
                 1000BASE-X (ST, SC, LC, SFP)
                 1000BASE-BX (SC, SFP)

Cable Types

Copper: 

    

EIA/TIA 568A/B, Cat 5 UTP and higher

Fiber:        Multimode: 50/125, 62.5/125µm
                 Single-mode: 9/125µm

AC Power Requirements

(Models with AC/DC Adapters)

1 RJ-45 Port
100 - 240VAC/47 to 63Hz

0.34A @ 120VAC (typical)

2 RJ-45 Ports
100 - 240VAC/50 - 60Hz

0.63A @ 120VAC (typical)

DC Power Requirements
(Models with DC Terminals)

1 RJ-45 Port
+/-48 to +/-57VDC;
0.74A @ 48VDC
3 Pin Terminal (isolated)

2 RJ-45 Ports
+/-48 to +/-57VDC;
1.37A @ 48VDC
3 Pin Terminal (isolated)

A minimum DC input voltage of 50VDC is required to guarantee 25.5 

watts (for 802.3at) at the end of 100 meters on Cat 5 cable or better. 

Dimensions  (W x D x H)

4.5” x 6.0” x 1.0”   (114.3 mm x 152.4 mm x 25.4 mm)

Weight

Module Only:            1.1 lbs.  (498.9 grams)
Module w/ Adapter:

   

2.3 lbs.  (1043.3 grams)

Operating Temperature
(See Temperature Derating Table)

Commercial:   0 to 50°C
Wide:           -40 to 60°C   (-20°C AC cold start)
Extended:    -40 to 75°C   (-20°C AC cold start)
Storage:       -40 to 80°C

Humidity 

5 to 95% (non-condensing)

Altitude 

-100m to 4,000m

MTBF (hours)

Module Only:        474,000

AC/DC Adapter:   100,000

Warranty

Lifetime warranty with 24/7/365 free Technical Support

Regulatory Compliances
(* Pending)

Safety: 

UL 62368-1*,

 

UL 60950-1,

 

IEC 62368-1*,

 

IEC 60950-1,

 

EN 62368-1*, 

 

EN 60950-1, 

 

CAN/CSA C22.2 No. 62368-1-14*, 

 

CAN/CSA C22.2 No. 60950-1,

 

CE Mark

EMC: 

EN 55032/EN 55024 CE Emissions/Immunity

EMI: 

CISPR 32, 

 

FCC 47 Part 15 Subpart B Class A

EMS: 

IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, 

 

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, 

 

IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models), 

 

IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models),

 

IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models), 

 

IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; 

 

  Signal: 2 kV (AC models),

 

IEC 61000-4-6 CS: Signal: 3 V, 

 

IEC 61000-4-8 ( Magnetic Field) 30A/m, 

 

IEC 61000-4-11 (Voltage Dips, interrupts)

IP Rating: 

IP20 Protection

Page 17

Page 18

Summary of Contents for OmniConverter GPoE+/S











Reviews: