Environmental Notices
The equipment covered by this manual must be disposed of or recycled in
accordance with the Waste Electrical and Electronic Equipment Directive (WEEE
Directive) of the European Community directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/
EU, for electrical and electronic equipment sold in the EU after July 2019. Such
disposal must follow national legislation for IT and Telecommunication equipment
in accordance with the WEEE directive: (a) Do not dispose waste equipment with
unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it
must be collected separately from other types of waste. In case of small items the
symbol may be printed only on the packaging or in the user manual. If you have
questions regarding the correct disposal of equipment go to www.omniton-systems.
com/support or e-mail to Omnitron at [email protected].
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge
sensitive devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
Customer Support Information
If you encounter problems while installing this product, contact Omnitron Technical
Support:
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
38
Tesla
Irvine, CA 92618, USA
Email:
URL:
www.omnitron-systems.com
040-09400-001G 11/21
Page 3
OmniConverter
GPoE/S and GPoE+/S
User Manual
Product Overview
The OmniConverter GPoE/S and GPoE+/S media converters with multi-port
options provide 10/100/1000BASE-T copper to 1000BASE-X or 100BASE-FX fiber
conversion and function as Power-over-Ethernet (PoE) Power Sourcing Equipment
(PSE). Port configurations are available in single or dual RJ-45 and SFP ports.
OmniConveter GPoE/S and GPoE+/S
Equipment that provides DC power over twisted-pair cable is known as Power
Sourcing Equipment (PSE). Equipment that is powered over twisted-pair cable is
known as a Powered Device (PD).
The GPoE/S supports IEEE 802.3af PoE standard providing up to 15.4W of DC
power to each PD.
The GPoE+/S supports IEEE 802.3at PoE+ standard providing up to 30W of DC
power to each PD.
Installation Procedure
1) Configure DIP-switches
2) Install the Module
3) Apply Power
4) Connect Cables
5) Verify Operation
1) Configure DIP-switches
DIP-switches are located on the side of the module. The DIP-switches are used to
configure ports, link modes and PoE/PSE options.
Page 4
