Össur Rebound, Instructions For Use Manual

Page: 8 / 89

8
6. Repeat on the other hinge.
7. To add flexion stop: Follow step 1, insert desired flexion stop, and
then follow steps 5–6.
Attaching PCL Strap
1. Note height position on medial and lateral hinge arms.
2. Remove hook-and-loop fastener to access connection area.
3. Remove Acculign hinge screws.
4. Remove Acculign hinge d-Ring.
5. Position PCL Acculign hinge d-ring.
6. Position PCL Acculign hinge inserts with raised portion into recessed
pocket.
7. Return frame to initial positions on hinge arms.
8. Tighten Acculign screws.
9. Reapply hook-and-loop fastener.
10. Attach PCL strap.
LIMITED WARRANTY
This warranty covers all defects in materials and workmanship of your
new Rebound DUAL Knee Brace. This warranty covers the frame and
hinges for 2 years, and custom warranty is lifetime. The warranty covers
all other materials, including straps, sleeves, liners and pads for six
months from the date of original purchase.
Össur will repair or replace (at its option) any defective part covered
under warranty at no charge. Repairs necessitated by accident,
negligence, misuse or abuse by the purchaser are not covered. Also,
consequential and incidental damages are not recoverable under this
warranty. These limitations may not apply as some states do not allow
the exclusion or limitation of incidental or consequential damages. Only
the original purchaser is entitled to claim service under this warranty.
To obtain service under this warranty call our Customer Service
Department.