Ossila Slot-Die Coater
User Manual
Ossila.com
23
Ossila Limited © 2019
9.2.4
Program Mode
Program Mode
allows the user to set up a coating process by defining several parameters. Press the
button to enter
Program Mode
. Entering edit mode on any parameter will turn the text of the
parameter red.
1.
The unit can store up to 20 programs in
memory with up to 50 steps in each. The
current program can be changed by
navigating to ‘P
rogram
’ with the
button. Press
to enter edit mode and
press
or
to change the program
number. Press
to exit edit mode.
Program number can also be changed using
or
without entering edit mode.
2.
To change the number of steps in the
program, navigate to steps line and press
to edit the value. Press
or
to
change the value. Press
to exit edit
mode.
3.
The size of syringe that has been selected in
the
Settings
Mode
appears in the top right
corner. This value can be edited from the
Settings Mode
(see
Section 9.2.2
).
