Ossila Slot-Die Coater
User Manual
Ossila.com
19
Ossila Limited © 2019
9.2.2
Settings Mode
The
Settings Mode
allows the user to input parameters related to the hotplate operation, syringe
properties and stage homing. Edit mode can be entered by pressing
on the required line.
Entering edit mode on any parameter will turn the text of the parameter red.
1.
Press
to enter
Settings Mode
.
2.
To switch the hotplate
ON
, navigate to the
‘Hotplate’ line and press
to switch
ON
the hotplate. The ‘Heater’ LED will blink
ON/OFF whilst the hotplate is heating and
remain
ON
when it reaches the set
temperature. You can switch
OFF
the
hotplate by pressing
again.
Note: The Hotplate icon on the
screen will blink RED while the
hotplate is switched ON.
3.
The hotplate temperature is set by
navigating to the ‘Hotplate temp’ line and
pressing
to edit the value. To navigate
between the digits, press the
or
buttons. To change the value of the
selected digit, press the
or
buttons. Press
again to exit the edit
mode. The maximum set value allowed is
120°C
.
