OSS OSS-PCIE-4UV-5-1, User Manual

Page: 52 / 90

One Stop Systems
OSS-PCIe4-4UV-5 52
8 PCIe card Installation
This chapter provides information on how to install GPU cards or PCIe cards into your One Stop Systems expansion chassis. More details on the
installation of individual cards are provided by the card’s manufacturer. For the purpose of installation, the One Stop Systems expansion
chassis functions exactly as a standard desktop computer chassis. Always follow the manufacturer’s instructions for installing their card or hard
drive on a desktop computer.
CAUTION
Hardware installation shall be performed only by qualified service personnel per UL and IEC 60950-1.
IMPORTANT
We will provide reasonable technical support with GPU cards or PCIe cards. However, if you have verified a successful
installation of the One Stop Systems expansion system, but experience difficulty installing your GPU cards, please
contact the card manufacturer for support.
8.1 Power Down System
You must turn OFF or power down the system before you start installing PCIe cards. After you have completely power down the system,
disconnect or remove the power cords and cables from the back of the expansion chassis.
8.2 Open PCIe Expansion Chassis
Unscrew the four screws on the front of the unit and slide the lid towards the front as shown below:
Remove slot covers