OSS OSS-EOS-2U-41, User Manual

Page: 28 / 46

One Stop Systems
OSS-EOS-2U-4I | 28
3 OSS Target Card Installation
CAUTION
Power down the system first before installing a PCIe card
Begin the installation by first powering down your computer. Remove the power cord. 5VSB (5V Standby) is still available if the power cord is
still installed. Use the procedures for shutting down your operating system and shutting off power to your computer
provided in your owner’s
manual or system documentation.
Remove the top cover of unit, see “How to Remove Top Cover” section.
The PCIe host card is a “half - height,” x16 - capable PCIe card mounted to a “full - height” bracket as shown below .
For low profile case applications, change the mounting bracket to the low-profile bracket. You can order a low-profile bracket by contacting our
Sales Support. Re
placing the “High Profile Bracket” with “Low Profile Bracket” is done by removing the screws that hold the card to the
bracket. Detach the standard bracket from the card and place the low-profile bracket and secure it. Use proper ESD procedures when
completing this action.
Once the bracket is mounted, configure the card dipswitches to host mode at x16. See settings below.