Osprey 800e Series User Guide
Osprey Video
2
© 2014 Osprey Video. All rights reserved.
Osprey
®
and SimulStream
®
are registered trademarks of Osprey Video. Microsoft
®
,
Windows
®
7, Windows Server
®
2003, AVStream
®
, DirectShow
®
, Intel
®
CoreDuo
®
,
and Windows Media
®
Encoder are trademarks or registered trademarks of
Microsoft Corporation. Any other product names, trademarks, trade names,
service marks, or service names owned or registered by any other company and
mentioned herein are the property of their respective companies.
No part of this specification may be reproduced, transcribed, transmitted or stored in a retrieval system in any part or by
any means without the express written consent of Osprey Video. Osprey Video reserves the right to change any products
herein at any time and without notice. Osprey Video makes no representations or warranties regarding the content of this
document, and assumes no responsibility for any errors contained herein.
UL Statement
Underwriters Laboratories Inc. has not tested the performance or reliability of the security or signaling aspects of this
product. UL has only tested for fire, shock and casualty hazards as outlined in UL’s Standard for Safety UL 60950
-1. UL
Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF
THIS PRODUCT.
To maintain UL compliance, this product is to be used only with UL Listed computers that include instructions for user-
installed accessories.
FCC Notice
WARNING
: Connections between this device and peripherals must be made using shielded cables in order to maintain
compliance with FCC radio emission limits.
WARNING
: Modifications to this device not approved by Osprey Video could void the authority granted to the user by the
FCC to operate the device.
The Osprey 800e Series video capture device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the computer into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
If the above measures are unsuccessful, please consult the dealer or manufacturer of your radio or television receiver, or
speak with an experienced radio/TV technician.
Note: This reminder is provided to call to the CATV installer’s attention Section 820
-40 of the NEC, which provides guidelines
for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Shielded Cables:
Connections between this device and peripherals must be made using shielded cables in order to maintain
compliance with FCC radio emission limits.
Modifications:
Modifications to this device not approved by Osprey Video could void the authority granted to the user by
the FCC to operate the device.
Note to CATV Installer: This reminder is provided to call to the CATV in
staller’s attention Section 820
-40 of the NEC, which
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
Product Disposal Information
Dispose of this product in accordance with local and national disposal regulations (if any), including those governing
the recovery and recycling of waste electrical and electronic equipment (WEEE).
RoHS Compliant:
Osprey Video is committed to compliance with the European directive on the Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, Directive 2011/65/EC, the RoHS
directive. For current RoHS statement, visit www.ospreyvideo.com
