Osprey 800e Series User Guide
Osprey Video
14
Installing the video capture card
All computer cards are sensitive to electrostatic discharge. Slight electrostatic discharges from
clothing or from the normal work environment can adversely affect these cards. By following these
simple guidelines, however, you can minimize the chance of damaging the Osprey video capture
card.
•
Handle cards only by the non-conducting edges.
•
Do not touch the card components or any other metal parts.
•
Wear a grounding strap while handling the cards (especially when located in a high static area).
•
Properly ground your computer to avoid static discharge.
•
Ensure the workstation is powered off before installing any components.
•
If you are not familiar with how to install a PCI Express bus card, refer to the system’s documentation
for more complete, step-by-step instructions.
•
Install the card only in UL Listed computers that include instructions for user-installed accessories.
1.
Power down and unplug your computer.
2.
Remove the computer’s cover and locate an empty PCI Express slot.
WARNING! Be sure to install the card in the PCI Express slot. This slot is usually black. Refer to the
following diagram as a guide. Placing the card in the wrong slot can damage the card.
Figure 13. Typical PCI Express Slot diagram
3.
Remove the cover screw from the empty PCI Express slot’s cover, set the scre
w aside.
4.
Remove the slot cover.
5.
Remove the Osprey video capture card from its anti-static bag.
6.
Insert the Osprey card into the desired PCI Express slot and make sure it is seated evenly.
Note: The slot must be x4 or higher.
7.
Secure the back panel of th
e card with the slot’s cover screw.
8.
Replace the computer cover.
9.
Plug the power cord into an electrical outlet and turn the computer on.
