19
!
WARNING
Constant voltage present in the junction box. Be-
fore any electrical work is done, the power sup-
ply must be disconnected and secured against
activation while the work is in progress.
5.1 Settings
5.1.1 Thermostat setting
The thermostat on the product is adjustable from
5-70°C. The thermostat should not be set lower
than 65°C to prevent bacteria growth. To adjust
the temperature:
A) Disconnect the power supply.
B) Remove the electric junction box cover (1) with
a screwdriver.
C) Adjust the temperature on the thermostat ad-
justment dial (3).
D) The thermostat is adjustable from 5-70°C. Turn-
ing the dial (3) all the way to + gives the high-
est temperature (70°C). The temperature can
be reduced as desired by turning the dial (3)
towards (-).
Fit the junction box cover (1) before connecting
the power supply.
5.1.2 Resetting the safety thermostat
The safety thermostat on the product cuts out
when there is a risk of overheating. This is reset
by removing the cover (1) and pressing the ‘Safety’
button (4). If the thermostat cuts out repeatedly,
contact the installer.
5.1.4 Adjusting the feet
The product is equipped with three factory-
fitted feet (2), adjustable from 0-40 mm. Screw
the feet out a minimum of 15 mm from the bot-
tom of the product. Adjust the feet individually
until the product is standing firm and straight
vertically and horizontally.
5. USER GUIDE
R
S
-
+
P
a
te
nt
ed
T115
16
A
2
50
V
A
B
Safety
Type: TSR
COTHERM
-
+
P
a
te
nt
ed
T115
16
A
2
50
V
A
B
Safety
Type: TSR
COTHERM
L
N
3
4
20
30
40
50 60 70
80
90
100
110
10
120
0
°C
1
2
!
WARNING
The thermostat must never be dismantled/
opened. This will compromize its function
and cause risk of overheating. Warranty will
cease.
Summary of Contents for Delta Twincoil DTC 200
Page 26: ...26 NOTES ...
