FIGURE 3
FIGURE 4
3 Start Up
3.1 Introduction
• Please place the system in a cool, ventilated, solid horizontal surface, away
from any heat source. The system comes ready installed with the filters so you can
right away fill the Supply Pitcher.
3.2 Filling the Supply Pitcher
• Open the tank lid (Figure 3).
• Lift the Supply Pitcher out.
• Fill the Supply Pitcher with fresh water
and put it back on to the base (Figure 4)
and close the lid.
• Note: machine will not run without the
Supply Pitcher Lid clipped on.
.
3.3 Power Connection
• Insert the power plug into the socket (see Figure 1). The system will beep and light
up which indicates the machine is ready to use.
Note: This product is only suitable for AC 220-240V, 220V power supply, and
should be used alone or over rated 10A with a earthed socket.
