SPB-1500
OSKAR Portable Blower
5
www.oskarsales.com
explosion. Please confirm there aren’t
any flammables near the working site to
avoid hazard.
4.
This product is suitable for collecting
smoke and welding oil gas. Do not use it
in collecting iron chips and dust at the
same time to avoid producing sparks.
5.
Before replacement of parts or any
materials, be certain that the switch is
disconnected.
6.
Do not kink the power cord and keep it
away from oil, chemicals or flammables.
7.
Check that the voltage, phase count and
grounding wire match the machine
requirements.
8.
When the fan blades are operated at
high speed, do not reach hand near
these blades to prevent finger from
breaking or clothes/necktie from getting
caught. Do not put the hand or foreign
matter into the air inlet to avoid getting
caught in the high-speed rotation of fan
blades.
9.
When not in use, all air inlets of blower
shall be covered.
Assembly
Do not connect the
blower before the
assembly is finished and you have read
and understood all of the precautions
stated in the Manual.
NOTE
: For correct assembly, refer to the
Illustrations and Parts List on pages 12-15.
Installation
MOVING AND TRANSPORTATION
The net
weight of this machine is about
143.4 lbs. It CANNOT be handle
d and
transported without the help of lifting tools.
For your safety, read all instructions
carefully.
Do not move
without the help of
others to avoid causing danger.
ELECTRICAL INSTALLATION
POWER CONNECTION
1.
Confirm that the power is properly
connected under normal power supply
condition. It is recommended to provide
manual shutdown device before
connecting power.
2.
It is recommended to protect the control
equipment with suitable grade of fuse
and the length of fuse and power cord
shall not be over
10
feet.
SHUTDOWN
1.
Disconnect power by manual method.