SPB-1500
OSKAR Portable Blower
Please read and save these instructions. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by observing
all safety information. Failure to comply with instructions could result in personal injury
and/or property damage! Retain instructions for future reference.
www.oskarsales.com
SMT-080818
General Safety Information
(Continued)
Use this product
carefully to
effectively avoid any possible danger.
Observe the following safety
regulations to avoid bodily injury due
to electrocution during use.
Read this Manual carefully before operating
the product and preserve the Operation
Manual properly.
1.
Keep work area clean and organized.
y
A disorderly working environment will
cause inconvenience and danger
during operation.
2.
Check if the working environment is
suitable for using the product.
y
Do not use the product in a humid
environment.
y
Use the product in a good working
environment to reduce risks.
y
Do not use the product in a flammable
gas or liquid environment to avoid
danger.
3.
Keep other persons away from the
product, except for the operator, to
avoid danger.
y
Do not let children get close to the
product. All wires used by the product
shall be in a safe location to prevent
children from touching them.
4.
All tools shall be safely stored.
y
When the tools are not used, please
store them in a dry place safely
beyond the reach and access of
children.
5.
If the machine breaks down, contact a
service technician. Do not attempt to
repair and possibly damage the machine.
6.
When using the product, be sure to put
on a welding suit and mask.
7.
Use the electrical wires correctly.
y
During use, do not drag the electrical
wires forcefully. Do not use these
wires if fraying or current leakage
occurs to avoid injury to the operator.
8.
Before replacing parts, shut off power to
the machine.
y
Check that the switch is in “on” or
“off” position. Do not attempt the
replacement when the machine is
running. To replace parts or filter
material, make certain that the switch
is “off”.
9.
Use the power cord correctly. The total
length of power cord shall not exceed
10
feet to avoid low power due to a drop in
voltage and to prevent a possible hazard.