Oshkosh Corporation JLG H800AJ, Operation And Safety Manual

Page: 36 / 164

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-8
– JLG Lift – 3121769
14. Engine, Clutch Linkage, Integrated Motor Generator - See
Inspection Note.
15. Engine Battery - Proper electrolyte levels; cables tight, no
visible damage or corrosion.
16. Tie Rod and Steering Linkage -
See Inspection Note.
17.
Upright - In vertical position, relative to the chassis. Refer to
Figure 2-7. and Figure 2-8. If out of alignment, do not use
machine until the upright has been synchronized in accor
-
dance with Section 4.16.
18. Tower Boom - No visible damage; wear pads secure. All cyl -
inders - rod end pins and barrel-end pins properly secured.
19. Hydraulic Pumps -
See Inspection Note.
20.
Frame - See Inspection Note.
21. Main Boom Sections - No visible damage; wear pads
secure. All cylinders - rod end shafts and barrel-end shafts
properly secured.
22.
SkyGuard - See Inspection Note.
Figure 2-3. Daily Walk-Around Inspection (Sheet 2 of 3)