Installation and operating manual for WATERFRIEND exclusive MRD-2 Page 37 (44)
osf-Waterfriend MRD-2
192.168.123.161
Dev. ID: xxxxxx SN: 2997
WATERFRIEND
MRD-1 VER. 1.0 26.03.2014
(C) osf Made in Germany
After that, your device will appear in your device overview and can be operated using the communication server:
INTERNET CONNECTION VIA
COMMUNICATION SERVER
LAN-Pin xxxx
IP-ADDRESS AUTOMATIC
For the use of the communication server, the Internet
connection via the communication server must be
enabled.
Changing the PIN (password)
The MRD-2 contains 2-level password protection for access via the LAN. The User PIN lets you operate the
control unit and adjust the essential main functions. The Service PIN is needed to perform service functions and
to change settings at the Service level. The following PINs are factory-set:
User PIN: 1234
Service PIN: 5678
The MRD-2 must be connected to the Internet in order to be able to change the PINs. You make the change to a
PIN via the WEB interface of the communication server.
Assigning a new PIN
1. Log in as usual to the communication server
2. Then log in with the Service PIN
3. In t
he Home page, press the “
menu
” button
4. In the main menu, press the
„Service“ button
Read the Device ID and enter it in the user
profile of the osf communication server.
Factory setting: osf Communications Server enabled
