OSF WATERFRIEND exclusiv MRD-1 Installation And Operating Instructions Manual Download Page 31 | Manualshive

Page: 31 / 44

OSF WATERFRIEND exclusiv MRD-1 Installation And Operating Instructions Manual Download Page 31

Installation and operating manual for WATERFRIEND exclusive MRD-2 Page 31 (44)

Within a few minutes you should automatically receive an e-mail for confirming your identity. (Check your Spam
folder if the e-mail does not arrive). Click the activation link in the e-mail to activate your account.

Registering a new device with the server

Once you have personally registered, you can log in and then register your new device in your user profile.

Each web-enabled osf control unit has a DEVICE ID (identification number). This DEVICE ID must be entered in
the correct column in order to register the device with the communication server. You can find the DEVICE ID of
your device displayed on its Information page (see above). For devices without a display, the ID number appears
on an adhesive label. When finished, save the information you have entered.

If you press the “Your devices” button, your device is now displayed in your Device panel and can be operated via
the communication server:

Enter the DEVICE ID

Complete the form

«
...
29
30
31
32
33
...
»

Summary of Contents for WATERFRIEND exclusiv MRD-1













































Reviews:

No comments