LMW-230 SERIES LCD MONITOR User Manual
- 21 -
1. Backlight Intensity is a factor in the operating life of the backlight. Reducing the intensity will lengthen
the backlight life whilst maximum intensity will decrease backlight life.
2. NOTES: the displaying signal, switching from HDMI to DVI-D or from DVI-D to HDMI, may not
normally display.
3. Component level only effects for YPbPr 480i input signal, and it will be set in blue color when other
signal. Component level always uses SMPTE except for 480i60 input signal.
4. NTSC SETUP only effects for NTSC input signal, and it will be set in blue color when other signal.
5. COLOR MATRIX is only applied to 480i/60 or 480/60p input signal, and it will be set in blue color when
other signal.
Press
∧ (
up) or
∨
(down) button to select “NEXT PAGE” item, then press Enter button to display
the next page menu as follows.
Sub Menu
Settings
Explanation
USER CONFIG 2/4
-NEXT PAGE
-UMD DISPLAY
OFF
<ON>
<OFF>
-UMD COLOR
RED
<RED>
<GREEN>
<YELLOW>
<WHITE>
-UMD
CHARACTER
1
LMW-230H MONITOR
16 characters
-TC DISPLAY
OFF
<ON>
<OFF>
Display --:--:--:-- if no TC in ANC
-WAVE FORM
2
OFF
<OFF>
<WAVE>:Waveform
<VECT75> Vector graph
<VECT100> Vector graph
-WAVE FORM POS
2
TOP
RIGHT
<BOT LEFT>
<BOT RIGHT>
<TOP LEFT>
<TOP RIGHT>
-FORMAT DISPLAY
AUTO
y
<ON> the format and scan mode are
always displayed
y
<AUTO> the format and scan mode are
displayed for about 10 seconds when
the input of the signal starts
y
<OFF> the display is hidden
