LMD9014 LCD MONITOR User Manual
—
16
—
UMD NAME(S/N)
*8
O
O
O
S00000
16 Characters totally. UMD
NAME is in compliance with
IMAGE VIDEO Protocol
UMD TLY MODE
*9
O
O
O
T1…T2…T1T2…T2T1
…T1-…T2-…T1T2-
…T2T1-…
UMD TLY MODE is in
compliance with IMAGE
VIDEO Protocol
UMD BAUD RATE
*10
O
O
O
2400…4800…9600…
19200…38400…57600…
115200
TLY SOURCE
*11
O
O
O
STANDARD…IMAGE
VIDEO
HW…IMAGE
VIDEO 422…
SIV422…
TSL
NOTES:
*1. OSD TLY DISP, OSD TLY MODE
Use these settings to choose how tally is displayed on the screen. The available OSD Tally
options depend on the Tally Source.
OSD TLY DISP
can be set to
Off
，
ON
；
OSD TLY MODE
can be set to
RGY
,
RG
, or
GR
:
When the Tally Source is set to
STANDARD
or
SIV422
,
OSD TLY MODE is
available.
When the Tally Source is set to
IMAGE VIDEO 422
、
TSL and IMAGE VIDEO HW
,
OSD TLY
MODE is unavailable.
• Off: On-screen tally is disabled.
• ON: On-screen tally is enabled.
• RGY: Red, yellow, or green tally signals are indicated at both the bottom left and bottom right
corners of the screen near UMD.
• RG: Red tally is shown at the bottom left of the screen and green is shown at the bottom right.
• GR: Green tally is shown at the bottom left of the screen and red is shown at the bottom right.
*2.
LED TLY DISP
Use this setting to enable or disable the LED Tally. When it is set to ON, the yellow, red and
green LED above each display will respond to tally commands, according to the Tally Source
setting.
*3. UMD FIXED SETUP
Use this setting to display static UMD text on the screen. This setting is used to enter UMD text
locally, when a serial protocol is not used for remote control. The UMD will be overridden by serial
protocol commands.
Press ENTER to edit the UMD. Use the ENTER button to move the cursor. Press ENTER with the
cursor on the character to be changed and use the Up/Down button to scroll through character
options. Press ENTER to choose a character. Press MENU to return to the up menu and save the
UMD setting.
Summary of Contents for LMD9014
Page 1: ...LMD9014 USER MANUAL ...