OSEE IRS3232, User Manual

Page: 26 / 37

Network Control
20
Classify Items Default Value Description
Gateway 192.168.1.1
It displays the IP address of the
gateway.
Alarm IP 192.168.1.100
It displays the IP address which is
used to receive the alarm
information.
Alarm Port 8000
It displays the communication port
which is used to receive the alarm
information.
 Remember to enter a new IP address into your Web browser's address bar,
if the device's IP address has changed.

The value of
Protect
must be set as
Disable
when you switch the signal
source for an output destination in REMOTER page, otherwise, you can't
make it successfully.
3.
Color settings
It is used to set up the color information for detecting the signal source
(Detection Enable) and not detecting the signal source (Detection Disable),
as shown in Figure 6.2-4, it contains the following items:
Figure 6.2-4 Router Page-Color Settings
 Enable Function
Detection
Function
Type Items Description
Detection
Enable(detecting
signal source)
Source
Current
Output
Select a color for a signal
source when it is the current
output.
Normal
Select a color for a signal
source whose status is normal