OSEE IRS3232, User Manual

Page: 22 / 37

Device Application
16
Figure 5.1-2 A Complex System
 Connection principle: use the Ethernet interface to connect the router
and the remote control panel.
 The IP address should not be repeatable in a network system.
5.2
Operations
You can do the following operations to a router before operating:
Step 1
Connect the input resource signals
INPUT
at the rear panel of the
router.
Step 2
Connect the output lines to
OUTPUT
at the rear panel of the router.
Step 3
Connect the power lines.
Step 4
Connect the reference voltage line to
REF
at the rear panel of the
router.
Step 5
Connect the routers and the remote control panels through
ETHERNET
using a switch.