OSEE IRS3232, User Manual

Page: 13 / 37

Unpack and Installation
7
Chapter 3 Unpack and Installation
Unpack:
When unpacking the components of router, please verify that none of the
components listed in Table 3.1 are damaged or lack. If there is any missing,
contact your distributors or OSEE for it.
Table 3.1 Packing List
No. Item Quantity
1 Device 1
2 Power cord 2
3 adapter 2
4 User manual 1
5 warranty card 1
6 quality certification 1
Installation:
1.
Prepare for installation
Please follow the procedures below before installing the device:

Check the equipment for any invisible damage that may have occurred
during transit.

Confirm all the items listed on the packing list have been received.

Remove all the packing material including electrostatic-resistant
packing.

Retain these packing for future use.
2.
Install device in your desired location of a standard 1U rack or a
standard cabinet. Adequate ventilation is required when installed to
prevent possible damage to the router’s internal components.
3.
Connect required cables for signal input and output.
4.
Connect AC power source using the included power cord.
5.
Connect the power cord to the rear panel.
6.
Fasten the power protect accessory.
7.
As a final step, power the device on.