IMP5212 Features
32
1
2
3
4
5
6
7
8
ON
DIP
Figure 4.2-22 The Dip Switch Sequence of RS232
The interface is used as RS422 when the dip switch is set as this: the
former three bits are set to OFF and the latter five bits are set to ON, as
shown in Figure 4.2-23.
1
2
3
4
5
6
7
8
ON
DIP
Figure 4.2-23 The Dip Switch Sequence of RS422
(5) ETHERNET (RJ-45)
It provides one 10/100M Ethernet interface which is used to
connect with a computer to access the network control page or run
the device control tool to modify the network settings.
The default IP address of IMP5212 is 192.168.1.10.
Figure 4.2-24 The Ethernet Interface
4.3
Device Connection
Connect the signal sources with the input interfaces of IMP5212 using cables,
and connect the display screens with the output interfaces of IMP5212 using
cables. The arrangement of the input modules and the output modules fully
loaded are as shown in Figure 4.3-1:
