OSEE HCM-700, User Manual

Page: 37 / 75

Monitor Settings
31
Figure 4.2-21 Load a LUT
After loading a LUT file, it will be loaded to the output image immediately, as
shown in Figure 4.2-22:
Figure 4.2-22 Output Image Loading a LUT File

Refer to “5.1.4 Look Tools” for the details about loading the 3D LUT file.
3.
RESET CALIBRATION LUT
Select
system

CALIBRATION

RESET CALIBRATION LUT
item to restore
the default LUT file, it will prompt as shown in Figure 4.2-23:
Figure 4.2-23 Reset CALIBRATION LUT
It will revert the Gain and Offset values to default values for the current profile
selected in the
LOOK PROFILE item.