OSEE HCM-700, User Manual

Page: 31 / 75

Monitor Settings
25

INPUT FORMAT
The Signal Format usually displays as the following situations:

UNKNOWN : appears if an unsupported signal is input.

NO SIGNAL
: appears if no signal is detected.

Normal
: the signal format is displayed as HDMI 1080i59.94, SDI
1080i59.94, etc. when the input is supported by the monitor.

TALLY Indicator

: Tally is on;

: Tally is off.
3.
Data Save and Download

Save Settings: SAVE PROFILES TO SD CARD
Save the menu settings data to the external SD card as backup. The backup file
is saved in time sequence, and the file is named as
“jtj_backup_yyyymmddhhmmss.bin”.
Select user

PROFILES

SAVE PROFILES TO SD CARD item, it will pop up a
prompt, as shown in Figure 4.2-12. The old data in SD card will be erased, scroll
the joystick right to select
SAVE
command, then, press the joystick straight down
to confirm the selection, it will prompt not cutting off the power during saving
profiles, as shown in Figure 4.2-13:
Figure 4.2-12 Prompt for Saving Data