5
Electrical Wiring
1. Provide DC 12 Volt input power for 13.226.12.
(Provide DC 24 Volt input power for 13.226.24)
2. Protect input power positive (+) terminal with 8 A fuse or circuit breaker.
(Use 4 A fuse for
13.226.24)
3. Use 12-gauge power cable for wiring distance not more than 30 ft (9 m), and use 10-gauge power
cable for longer wiring distance.
4. According to your control device, see below and the diagram:
(a) If joystick, the spot light links to joystick control panel by telephone line.
(b) If handheld remote control, no additional wiring needed.
(c) If mounted remote control, provide input power to the mounted remote control. Protect
input power positive (+) terminal with 1 A fuse or circuit breaker.
！
The power switch on joystick control panel should be set to “POWER OFF” before supplying power
to the product.
！
Use correct product for your power source (DC 12 or 24 Volt). Wrong voltage will damage product
and may cause safety hazard.
