background image

10 

What to do if … 
… the LED does not light. 

 

The light may be turned off by over-heating protection.    Turn off power to allow the light to cool 
down.    The light will resume normal operation after 30 to 60 minutes typically. 

 

Examine the LED light assembly. 

 

Check if correct type of telephone line (RJ11 6P4C Pin 1-1 straight through) is used. 

… the spot light does not respond to remote control. 

 

Press and hold button for 2 seconds. 

 

Move to a location that is less than 15 m away. 

 

Move to a location that has no obstructing structure between remote control and spot light. 

 

Make sure the light is not mounted on any metal surface and there is sufficient clearance below. 

 

Replace battery for remote control. 

 

Check whether the last digits of serial numbers inside light housing and inside remote control are 
identical. 

… the spot light does not respond to any control. 

 

Check voltage of inboard battery. 

 

Check the fuse or circuit breaker that protects spot light and joystick control panel. 

 

Carefully uninstall the spot light.    Examine the electrical connections and wire harness. 

 

Check if correct type of telephone line (RJ11 6P4C Pin 1-1 straight through) is used. 

 

Do not replace a blown fuse until the cause of spot light malfunction is identified and resolved. 

 

DO NOT replace a blown fuse with a fuse that takes higher current. 

… the spot light halt during operation. 

 

Return spot light and joystick control panel to dealer for further inspection. 

… the spot light cannot rotate in certain direction. 

 

Carefully uninstall the spot light and examine the electrical connections and wire harness. 

 

Replace joystick control panel. 

For other problems, and when problem is not solved with the above tips … 

Return complete product with proper packaging to dealer for inspection.    Include a description of the 
problem, user contact information, and proof of purchase if requesting warranty service.

 

 

Limited Warranty                                                                                                                                                         

For one (1) year from the date of original purchase, Osculati will, at its discretion, repair or replace for 
the original consumer, free of charge, any parts found defective in material or workmanship.    All 
transportation charges under this warranty must be borne by the consumer. 
Proof of purchase is required: A computerized register receipt is required.    Hand-written receipts are 
not accepted for warranty proof of purchase.    In the absence of a receipt, warranty period will be 
calculated from date of manufacture printed or stamped on the product. 
There is no other expressed warranty.    Implied warranties, including those of merchantability and 
fitness for a particular purpose, are limited to one (1) year from the date of purchase.    This is the 
exclusive remedy and consequential damages are excluded where permitted by law. 
This warranty does not apply if the product has been damaged by accident or misuse, or as a result of 
service or modification performed by an unauthorized factory.    Except as otherwise expressly stated 
in the previous paragraph, the company makes no representation or warranty of any kind, express or 
implied, as to merchantability, fitness for a particular purpose, or any other matter with respect to this 
product.    The company shall not be liable for any consequential loss to life safety and property if it’s 
due to user’s failure in following this manual to install and use the product. 

Changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment.

 

Summary of Contents for 13.226.12













Reviews: