iMSO-204x Manual
iOS, Android, PC or Mac Oscilloscope
RevOrig_20170727
14
2.82 Demo Amplitude
Touch
from the menu bar on the right. To change the
of the signal touch
located to the right of
. Enter the desired voltage using the pick wheel. To activate the
setting tap away from the menu.
2.83 Demo Frequency
Touch
from the menu bar on the right. To change the
of the signal, touch
located to the right of
. The pick wheel pops up and it is now possible to modify the
frequency by selecting the desired frequency. Frequencies can be entered in Hz, kHz, or MHz.
To activate the settings tap away from the menu.
2.84 Demo DC Offset
Touch
from the menu bar. To set the DC offset, touch
located to the right of
. Then select the desired voltage offset from the pick wheel. To activate the settings tap away
from the menu.
2.85 Duty Cycle
In order to change the Duty Cycle, the demo mode must be set to
. Once the
demo mode is switched to square the Duty Cycle option will change from
to
. To change the
of the signal, touch
. Enter the desired voltage
using the pick wheel. To activate the setting tap away from the menu or tap
.
2.90 Settings
iPhone/iPod touch-
When hardware is connected,
disappears and is replaced by
Then all additional setting are unlocked. In order to change the settings while in demo mode,
touch and hold
until it changes to
.
iPad/iPad mini-
appears in the main menu bar. When hardware is connected
disappears. Then all additional settings are unlocked.
2.91 Grid Settings
