Everest Fireplace Installation and Operation Manual
______________________________________________________________________________ 33
PART B
–
INSTALLATION
Install the fireplace only as described in these instructions and using only components from the
chimney manufacturers listed in Table 2.
Parts Required
•
Everest Fireplace
•
Insulated chimney made by the manufacturers listed in Table 2, with the corresponding
specifications:
Chimney lengths
Elbows (where necessary)
Associated components as per these installation instructions
Additional Equipment (optional)
•
Forced air distribution kit
•
Hot air gravity distribution kit
•
Fresh air intake kit
In order not to reduce the efficiency of the fireplace, it is strongly advised not to install the forced
air distribution kit in conjunction with the gravity air distribution kit.
6
SAFETY INFORMATION
6.1
SUMMARY OF INSTALLATION CAUTIONS AND WARNINGS
•
THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE APPLIANCE
ALWAYS OVERRIDES THE INFORMATION PUBLISHED, IN ANY OTHER MEDIA (OWNER’S
MANUAL, CATALOGUES, FLYERS, MAGAZINES AND/OR WEB SITES).
•
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING
COMPONENTS MAY RESULT IN HAZARDOUS CONDITIONS. WHERE ANY SUCH CHANGES ARE
PLANNED, STOVE BUILDER INTERNATIONAL INC. SHOULD BE CONTACTED IN ADVANCE.
•
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING BY THE
TESTING AUTHORITY VIOLATES CSA B365.
•
CONNECTION BETWEEN A 2100 INSULATED CHIMNEY AND A LISTED STAINLESS STEEL
CHIMNEY LINER IS ALLOWED IF A LISTED CONNECTOR IS USED. FOLLOW INSTRUCTIONS IN
SECTION 8.9 FOR THAT KIND OF INSTALLATION.
•
IF REQUIRED, A SUPPLY OF COMBUSTION AIR SHALL BE PROVIDED TO THE ROOM.
•
DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION DUCTWORK
UNLESS SPECIFICALLY APPROVED FOR SUCH INSTALLATION.
•
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.
•
THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED IN A MOBILE HOME.
