13
14
1
2
3
4
The back seat cushion is
connected with seat front
side with a zipper.
①
②
①
②
▲
④
Two air pipes and two air nozzles
on the upper end of the back seat
cushion are connected.
Connect the seat part and the air tube of the waist airbag; connect the waist heating wire;
finally connect the back cushion zipper together.
③
⑤
Connect the velcro
between leg rest and
seat front side.
Zip back seat cushion
front side with legrest.
⑥
①
Insert the plate bracket rod into the bracket seat of the left armrest. Insert it according to the shape
of the bracket and the shape of the seat hole until the bottom screw of the bracket is stuck in place;
②
Put the tablet controller into the bracket;
Installation
Installation
Installation 5
Installation 6
Installation
Installation
Step 6 Install the bracket of the tablet hand controller
Bracket seat
Left armrest
Step 7 Connect the air pipe with the heating wire and install the back seat cushion
Warm Suggestion
When the people sits on the chair, the bottom of the pillow is level with the ear, and
then the pillow is connected with the back of the back. This shape detection will be
more accurate, to achieve a comfortable massage effect.
When installing the back seat
cushion, we should pay attention
to: the middle leather position of
the back cushion is aligned with
the middle position of the chair
backrest .
The back seat cushion is
connected with the back
seat cushion and the two
sides of the back seat
through a zipper
Seat and back seat
cushion connect
heat cord.
Step 8 Operation after installation
Plug the power plug into the power box socket
under the backrest(Picture) :
Insert another power plug from the power cord
into the power socket.
Turn on the power switch at the back of the
power box.
(Power switch "O/I", press I to connect.)
Use the handy hand controller on the armrest
or the tablet hand controller to choose the
massage function, enjoy this product to bring
you relaxed and comfortable massage.
1
2
3
4
Before connecting the power plug to the
socket, be sure to check that the power
switch is in the off position.
Power box socket
Plug the power cord
into the power box
socket.
Bracket
A
U
T
O
