1
▲
15
16
The adjustment before massage
Caution
Environment
Check environment
Don’t use the chair in wet places like near
swimming pool, bath room to avoid lea-
kage or electric shock.
Don’t use under sunlight or near stove
or other heating place to avoid upho-
lstery deteriorated.
Please use chair in flat place to avoid
chair falling or noise or other unexpected
trouble.
Check places in front
Check the areas when back and leg extending,
make sure no people, pets or other things
around.
Check power cable, plug
(1) Clean the dust on plug on time.
(using dry cloth).
(2) No damage, re-do, bend, stretch, tie or
press with heavy thing(especially can’t be
pressed by the chair) on power cable.
At least 50cm in front of the leg.
Check surroundings
When the backrest or legrest reclines or
extends, please pay attention to:
(1) Check any person or things in every
direction.
(2) Check the space size.
M
a
s
s
a
g
e
o
p
e
ra
tio
n
Space size for using the chair
Zero space from wall.
Tips: at least 2cm from wall.
Check
Please confirm the
position of the
massage head before
sitting down slowly.
Avoid injury caused by
improper position of
massage head.
Proper posture: please
put your back against
the back of the chair and
lean your head back on
the pillow cushion.
When the position of acupoint pulse is
automatically measured, the hand controller
will prompt.
When the prompt of "adjustment of shoulder
height position" appears on the hand
controller, if the shoulder height needs to be
adjusted, the shoulder height can be
adjusted according to the up and down
arrows on the interface.
When you feel the
massage strength
When not enough,
please remove the
pillow and shoulder
pads, and then
massage.
Acupoint pulse tracking detection and
confirmation
Avoid massage head on your acupoint pulse
position detection is not accurate, affect the
comfort of massage.
When detecting the position of acupoint
pulse, if the massage head cannot detect it,
the shoulder should be in the middle
position by default.
Press down the head part to make the gravity
fall on the back castors. Then push the chair
to desired destination steadily and set it
down slowly.
During massage chair backrest lie down
process, can't move the armrest.
Rolling Wheel
No more than 40 degrees
Kind suggestion
The adjustment before massage
How to move massage chair
Adjustment before massage
Caution
Don’t move chair when it’s working in case
of accidents or damage
M
a
s
s
a
g
e
o
p
e
ra
tio
n
How to move
Bind the cables and put them in the seat to
avoid damage when moving.
If you plump the chair, it may damage the inner
parts of the chair.
Don’t use the castor if the floor is wooden or
other easy damaged material. It will need 2
or more persons to lift the chair.
Make sure the power is off and the plug
doesn't touch the floor(It’s better to
let the chair in standing
status to avoid the back
crashing the floor)
Normally
Please hold the footrest to move the
chair as shown in the picture in case
any scratches on the leatherette
Because the chair is heavy, it may ruin
your floor in long time
setting. Please put a
blanket or other soft
things toprotect
your floor.
Before adjustment
