6
SE113Z24E
■
Operating the screen
Please refer to the operations in the manuals (Remote Controller S-R1 and wall switch S-R2).
■
Applying tension to the screen
If the screen fabric is less tensioned around the weight bar area after use, adjust the tension using the
tension adjustment mechanism.
※
Turn the knobs 3 times clock-wise or counter clock-wise at maximum.
※
When tensioned too much, turn the knob counter clock-wise
to loosen the fabric. After leaving the screen for 2-3 days,
turn the knob to tighten again.
Please pull out the back panel of the remote controller, and put two dry batteries
(size AAA).
Clock-wise
：
to tension
Counter clock-wise
：
to loosen
How to use
Dry batteries
Change the two batteries to the new ones
when the signal is weak.
Take out all the batteries when you do not
use it for long to avoid the liquid leakage
damage
Do not use rechargeable batteries.
The operation range of IR remote controller
IR receiver
Remote controller
Do not drop, throw away, or put water on it, or it
may cause the breakdown.
Handle the remote controller carefully.
Please operate it to the direction of the infrared
receiver
Preparation of the remote controller
