16
2x4
English
REQUIREMENTS FOR ANCHORING THE MACHINE
The machine should be securely anchored, to a floor or a wall, if there is a risk of it tipping
over. It should be anchored either with the anchoring devices supplied or in some other way
(depending on the floor and the environment).
Place a bag in the
bag holder.
The machine is preset at the factory in a basic mode with the
frequency-based hatch opening
and
frequency-based time interval for the press plate in the compaction position
functions activated.
See the section
Functions and operating modes
for more information.
INSTALLATION AND PREPARATIONS FOR USE
NOTE! The machine has a high centre of gravity. This must be taken into account when the
machine is relocated. The machine must stand on a level floor surface.
Two people are required to remove the machine from the pallet. Wear safety shoes.
4
Summary of Contents for 490 1040-00
