1. Purpose
The wireless Repeater-R (hereinafter referred to as the “repeater”) is designed to increase the
range of wireless detectors to the Lun-R receiver that is connected to the Lun control panel (more
about for compatibility, see the documentation of the relevant control panel).
Product is not equipped with built-in cameras and microphones, devices and units for
hidden video and audio recording.
2. Safety Precautions
Only the employees, familiar with the module design, instructed on the safety arrangements
shall be allowed to install, routinely maintain and repair.
The device has an open live parts, representing the danger of electric shock to a person
– it is a terminal block marked as AC. No safety ground. You must turn off the power and
remove the battery BEFORE connecting and disconnecting the product.
3. Technical specifications
The repeater technical characteristics is shown in the Table 1.
Table 1. Technical characteristics
Characteristic
Value
Operating frequency range (depends of modification), MHz
433.05…434.79 or
868.70…869.20
Power radiated by the transmitter, mW
up to 10
The health test signals period, seconds
60
Mains supply voltage (50Hz), V
184…253
Power consumption from the mains supply, VA
1.5
Backup power source type
Battery LIR14500
Battery voltage, V
3.5…4.2
Estimated battery operating time, hours
24
Degree of protection provided by enclosure
IP30
Dimensions, mm
66*66*35
Weight, g
200
Relay-R
Version en_2
3
