9. Assembly declaration
Ortlieb Präzisionssysteme GmbH & Co. KG • Jura Str. 11 • 73119 Zell u. Aichelberg • Germany
19
Tel.: +49 (0) 7164 79 701-0 • Fax.: +49 (0) 7164 79 701-51 • e-mail: [email protected] • www.ortlieb.net
9 Assembly declaration
for an incomplete machine (acc. machine directive 2006/42/EG)
Name of the company and producer:
Ortlieb Präzisionssysteme GmbH & Co. KG
Jura Str. 11
73119 Zell u. Aichelberg – Germany
Phone:
+49 (0) 7164 79701 0
FAX:
+49 (0) 7164 79701 51
The QUADRO
®
lever-operated chuck is described as a incomplete machine according article 2g
of the machine directive and designated only to be mounted into or with an other machine or
equipment.
The following fundamental safety and health-protection requirements according attachment 1 of
the machine directive were used, are valid and adhered:
Nr. 1.1.3, Nr. 1.3.2, Nr. 1.5.4, Nr. 1.6.1
The following standards (or extracts of these standards) are used:
DIN 55026/27, DIN 6352, DIN 6343
The start-up of this product is forbidden until it is proven, that the machine in which the above
named incomplete machine is mounted to conforms the regulations according the machine
directive 2006/42/EG.
The special technical documentations according attachment VII part B have been complied. The
producer obligates to provide these documentations in written form to public authorities if their
request is justified.
Only the management of Ortlieb Präzisionssysteme GmbH & Co. KG, represented by
Mr. Dirk Laubengeiger, is authorized to comply the relevant technical documents according
attachment VIII B to this product
Zell unter Aichelberg,
Dirk Laubengeiger, Geschäftsführer
