ORTILEB SSF 16Z, Technical Documentation Manual, Page: 12 / 20

5. Accessories
12
Ortlieb Präzisionssysteme GmbH & Co. KG • Jura Str. 11 • 73119 Zell u. Aichelberg • Germany
Tel.: +49 (0) 7164 79 701-0 • Fax.: +49 (0) 7164 79 701-51 • e-mail: info@ortlieb.net • www.ortlieb.net
5 Accessories
5.1 Spare parts
Components
1 – main body
2 – sleeve
3 – pressure sleeve
4 – cap
5 – lever
Type Art. Nr. Pos. 1 Pos. 2 Pos. 3 Pos. 4 Pos. 5
SSF 30/5 SSF 30-05 SSF30-05/1 BSK1475/2 BSK1475/3 BSK1475/4 BSK1475/8
SSF 40/5 SSF 40-05 SSF40-05/1 BSK1476/2 BSK1476/3 BSK1476/4 BSK1476/8
SSF 40/6 SSF 40-06 SSF40-06/1 BSK1476/2 BSK1476/3 BSK1476/4 BSK1476/8
SSF 60/6 SSF 60-06 SSF60-06/1 BSK1477/2 BSK1477/3 BSK1477/4 BSK1477/8
SSF 60/8 SSF 60-08 SSF60-08/1 BSK1477/2 BSK1477/3 BSK1477/4 BSK1477/8
SSF 16Z SSF 16 SSF16/1 BSK1473/2 BSK1473/3 BSK1473/4 BSK1473/8
SSF 20Z SSF 20 SSF20/1 BSK1474/2 BSK1474/3 BSK1474/4 BSK1474/8
SSF 30Z SSF 30 SSF30/1 BSK1475/2 BSK1475/3 BSK1475/4 BSK1475/8
SSF 40Z SSF 40 SSF40/1 BSK1476/2 BSK1476/3 BSK1476/4 BSK1476/8
SSF 60Z SSF 60 SSF60/1 BSK1477/2 BSK1477/3 BSK1477/4 BSK1477/8
SSF 80Z SSF 80 SSF80/1 BSK735/2 BSK735/3 BSK735/4 BSK 735/8
The chucks type SSF16 – SSF30 have bearing jaws to transfer the force from the lever to the
sleeve. The chucks type SSF40 and larger use curve rollers. The maximum allowed RPM of the
chuck is limited by the max. RPM of the curve rollers.
Please note, the shown levers in the table refer to the standard.
If you need higher allowed revolutions, contact us. We have a special design using bearing jaws
with ceramic pins!