Ortech Y-H2, Operation & Installation Instructions, Page: 19 / 61

19
Remark:
Smoke or heat sensor : press quickly 1 time, this button will flash, after 1 minutes it will stop and the smoke and
heat sensor is on.
When the motor or lamp is on, touch the delay button 1 time and the delay status will be set. You can now
adjust the delay time.
Cleaning & Maintenance
ALWAYS SWITCH OFF AND UNPLUG FIRST!
SURFACES:
Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or
solvents on any part of this appliance as this will cause irreparable damage.
ALUMINUM GREASE FILTERS:
Wash in the dishwashers or soak the panels in a degreasing agent for an hour, then rinse off and dry before
reinstalling.
CHARCOAL FILTERS:
(only in recirculating model): Charcoal cannot be reused. They must be replaced with the appropriate types once
a year or depending on the frequency of appliance usage.
For this appliance to function effectively, regular maintenance is a must.
Clogged filters restrict airflow and may cause the motor to overheat.
5. Installation
Use suitable bolts to mount the appliance on a secure surface.
The minimum distance between the bottom of the range hood and the cooking surface shall be at least 65 cm.
When the range is located above a gas appliance, the recommended distance must be considered.