Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
LED Security Light
Sensors
MODEL
OL-
S
INSTALLATION GUIDE
Lights will not come on:
1. Light switch is turned OFF
2. Light is loose or burned out
3. Fuse is blown or circuit breaker is turned OFF
4. Daylight turnoff is in effect (double-check after dark)
5. Incorrect circuit wiring, if this is a new installation
6. Re-aim the sensor to cover desired area
Lights come on for no apparent reason:
1. Light control may be sensing small animals or
automobile traffic (re-aim the sensor)
2. Range is set too high (reduce range setting)
Lights come on
in daylight:
1. Light control may be installed in a relatively dark location
Lights
stay ON continuously:
1.
A lamp is positioned too close to the sensor or pointed at
nearby objects that cause heat to trigger the sensor
(reposition the lamp away from the sensor or nearby objects)
2.
Light control is pointed toward a heat source like an air vent,
dryer vent, or brightly-painted heat ref
le
ctive surface
(Reposition sensor. Reduce Range)
ORTECH reserves the right to modify at any time, without notice,
any or all of our product's features, designs, components and
specifications to meet market changes.
Lights flash ON and OFF:
1.
Heat or light from the lamps may be turning the light
control ON and OFF (Reposition the lamps away from
the sensor)
2.
Heat being ref
le
cted from other objects may be
affecting the sensor (Reposition sensor)
