ORPHELIA 24h, Manual

Page: 9 / 36

18 19
VD33/VD34
• After setting or changing the battery, before setting the time, check if the dual time
hour hand and dual time minute hand are at the “0” (12 o’clock) position.
• If either the dual time hour hand or the dual time minute hand is not at the “0” position,
reset it/themfollowing the procedure shown below:
1) Pull out the crown to second click (VD33) / first click (VD34)
2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the
buttons.
* Dual time minute hand moves and returns to where it was
3) Press button A or B to reset the dual time hands to “0” position.
* Button A : dual time hour hand and dual time minute hand move counter-clockwise
Button B : dual time hour hand and dual time minute hand move clockwise
* The dual time hour hand moves correspondingly with the dual time minute hand
* The dual time hour hand and dual time minute hand move quickly if the respective buttons are
kept pressed.
4) Push the crown back in the normal position.
Note : The dual time minute hand rotates one revolution at every quarter (15 minutes). There is no problem as it is typical function of the movement.
ADJUSTING DUAL TIME HANDS POSITION VD33/VD34
1. Pull out the crown to second click (VD33) / first click (VD34) when the second hand is at
the 12 o’clock position.
2. Turn the crown to set the hour and minute hands. (make sure 24 hour hand is set
correctly).
3. Push the crown back in the normal position in accordance with a time signal.
Note :
•
The 24 hour hand moves correspondingly with the hour hand.
• The moment the date changes is midnight. When setting the hour hand, make sure
that AM/PM is correctly set by using the 24 hour hand as an AM/PM indicator
LOCAL TIME SETTING