Operator Manual
Cha
pt
er
:
Equi
pm
ent
spe
ci
fic
at
io
ns
13
Equipment specifications
Technical specifications
Example of technical data:
Characteristics/Model
Evo White
Evo White LYNX
Power supply
Single-phase, 115-230 VAC±10%, 50/60Hz, 1.8kW
Pulse power and duration
130 J at 25 mS
160 J at 25 mS
130 J at 25 mS
160 J at 25 mS
Peak power
5 kW
7 kW
5 kW
7 kW
Average power
70 W
75 W
70 W
75 W
Repetition frequency
15 Hz
Welding spot size
From 0.3 to 1.5
Stereo-microscope
45° with 10X magnification and crosshair (Leica)
LYNX
Pulse-Shaping Programs
5
Programmable memory cells
32
Weight
32 Kg
34 Kg
Applied Standards and Directives:
The equipment has been manufactured in compliance with the provisions of the European Community Low Voltage (LVD) 2014/35/EC,
Electromagnetic Compatibility (EMC) 2014/30/EC and RoHS 2011/64/EC Directives and the following reference Standards:
BS EN 60825-1
Safety of LASER products
Part 1: Equipment classification and requirements
BS EN 61326-1
Electrical equipment for measurement, control and laboratory use. EMC requirements.
BS EN 61010-1
Safety requirements for electrical equipment for measurement, control, and laboratory use.
Intended use
Use
the equipment
to weld
specific
metal alloys
.
Only the following
alloys
can be used
:
•
Gold
•
Silver
•
Platinum
•
Palladium
•
Titanium
•
Steel
•
Cobalt Chrome
(
CrCo)
The
metals
and
alloys
listed
above
must not contain
any
of the metals indicated among those in
the
"Non-declared
uses”.
The protection gas recommended for the welding procedures
A
rgon. Only
use
original
Orotig S.p.A.
parts and consumables.
For technical assistance, contact
Orotig S.p
.A.
Once the
consumables
have worn out,
they must be replaced
.
Follow
all of the prescriptions
and
the
safety standards indicated
in this
manual
.
