11
Add card user
Automatic assignment of user ID number
(the device assign next available user ID number)
1 Read card/input card number #
User ID numbers:
- Common user ID (card, PIN code): 0~987
- Panic user ID: 988, 989
- Visitor user ID: 990~999
Users can be added consecutively without having to leave programming mode.
Manual assignment of user ID number
(Main user define a specific user ID)
1 User ID # Read card/input card number #
Manual assignment of user ID number
(allows Main user to ad dup to 988 cards in single step)
1 User ID # Card quantity # Read card 1/input card 1 number # Read card 2/input card 2 number
#
…
You need to read out/enter the numbers of all cards to be added one by one.
Add pin user
Automatic assignment of user ID number
(the device assign next available user ID number)
1 PIN code #
Users can be added consecutively without having to leave programming mode.
Manual assignment of user ID number
(Main user define a specific user ID)
1 User ID # PIN code #
Add panic user: 988, 989
Assigning a panic user ID number
–
card opening
1 User ID # Read card/input card number #
Assigning a panic user ID number
–
PIN code opening
1 User ID # PIN code #
Add visitor user
–
ID visitor number: 990-999
The main user can specify the exact number of entrances for the guest user (from 1-10)
Assigning a visitor user ID
–
card opening
1 User ID # 0-9 # Read card/input card number #
0-9 defines the number of entrances for a guest, where 0 means 10 entrances
Assigning a visitor user ID
–
PIN code opening
1 User ID # 0-9 # PIN code #
0-9 defines the number of entrances for a guest, where 0 means 10 entrances
Change PIN user
(PIN code must be 4-6 digits long excluding the combination 8888,
the operation must be performed outside the programming mode)
* User ID # Old PIN code # New PIN code # New PIN code #
Change PIN of card, PIN code opening
(automatically assigned PIN is 8888)
* Read card # Old PIN code # New PIN code # New PIN code #
Add user with Main card
Add user
–
card or PIN code opening
1. Read Main card
2. Read card/input PIN code the user you want to add
–
repeat it 3 times #
To add more users, repeat step 2.
3. Read Main card
Delete users
Delete user by card/PIN code
2 Read card/input PIN code #
Users can be deleted consecutively without having to exit programming mode.
Delete user by ID numbers
2 User ID #
Delete user by card number
2 Input card number #
Delete all users
2 Main code #
Delete user with Main card
Delete user
–
card/PIN code opening
1. Read Main card
–
twice and hold for 5 seconds
2. Read card/input PIN code the user you want to add #
To add more users, repeat step 2.
3. Read Main card
Door opening - settings
Electric door strike release time adjustment - pulse mode
3
1~99
#
default setting
Define the time for which the electric door strike is released (1-99sec), the default setting is 5sec
Electric door strike release time adjustment - toggle mode
3
0
#
Card access
4
0
#
PIN access
4
1
#
Card + PIN code access
4
2
#
Multi user access
4
3
(2-9)
#
Only after correct reading of 2-9 users the door will open
Card or PIN code access
4
3
# default setting
Door opening
