Ormesa DONDOLINO 1, Use And Maintenance Handbook

Page: 26 / 28

Pag. 24 di 24
CONDITIONS FOR DURABILITY, REUSE AND REASSIGNMENT TO A
NEW USER
Granted that Ormesa products should be selected, evaluated and ordered for the
needs of an individual user, reuse is however possible with the respect the follow-
ing conditions.
Based on the experience of other similar sold models, on technological progress, on the
guarantees of the Quality Management System certificated in 1998 according to ISO
9001, there is adequate confidence that
the average lifespan of the DONDOLINO is
about 5 years, on condition that it is used according to the directions given in the
user manual.
Only when the conditions for storage and transport of chapter HOW TO STORE AND
TRANSPORT THE MEDICAL DEVICE” are followed, the periods in which the product is
stored at the dealer should not be considered in that time period
Factors unrelated to the product such as the development of the user, its diseases,
the use and the surrounding environment can make significantly lower the dura-
tion of life of the product; on the contrary, if the indications on the use and
maintenance are properly observed, the reliability of the product can extend well
beyond the lifetime average above.
Prior to recycling or reassignment an already used Ormesa product, it is required
that:
1. a doctor or therapist verifies that the aid is appropriate and adequate to
meet the dimensional, functional and postural needs of the new user, and if
all its components are suitable / appropriate for him. You should also con-
sider that the
-marking and the manufacturer's responsibility for safety
requirements for the product remain only if the original product still has not
changed and only original accessories or spare parts have been applied
2. qualified technical personnel of a company specialized in the maintenance
of technical aids for disabled people performs a detailed technical inspec-
tion to verify its condition and wear, the absence of any damage and failure
of all components / adjustments, the presence of the user’s manual, of the
label with the date and serial number. A copy of the manual and mainte-
nance may be always requested to the retailer that supplied the product or
directly to Ormesa
3. The product has been thoroughly cleaned and disinfected following the di-
rections given in the “MAINTENANCE, CLEANING AND DISINFECTION”
Chapter
We recommend you keep written records on all inspections performed on the product before any
assignment to the new user.
In case of doubt about the safety of the product or damage to parts
or components, you are urged to immediately discontinue use and
contact a specialized service center in the maintenance of
mechanical aids for disabile, or directly ORMESA