Ormesa DONDOLINO 1, Use And Maintenance Handbook

Page: 24 / 28

Pag. 22 di 24
MAINTENANCE, CLEANINGAND DISINFECTION OF DONDOLINO
REGULAR (OR PREVENTIVE) MAINTENANCE )
REGULAR MAINTENANCE MUST BE PERFORMED ONCE A MONTH. REGULAR MAINTE-
NANCE IS REQUIRED TO KEEP THE PRODUCT WORKING PROPERLY AND SAFELY AND IS
ESSENTIAL FOR KEEPING THE MARK.
THE MANUFACTURER IS NOT LIABLE FOR THE PERFORMANCE OF THE PRODUCT UNLESS
REGULAR MAINTENANCE IS PERFORMED (ATTACHMENT 1, DIRECTIVE 93/42/EEC). THE
MANUFACTURER ALSO RECOMMENDS THAT YOU HAVE THE SUPPLIER PERFORM A COM-
PLETE REVIEW OF THE PRODUCT'S OPERATION AND SAFETY WITH THE FOLLOWING FRE-
QUENCIES:
\
1) within 3 months from purchase;
2) within six months from purchase;
3) once a year after the first year from purchase
Clean and disinfect the device and its accessories regularly, following the instruc-
tions provided below.
CLEANING AND DISINFECTIND THE VARNISHED AND CHROMIUM-PLATED FRAME
Clean and disinfect the varnished and chromium-plated parts of the aid with a soft cloth dipped in a
household detergent and disinfectant, such as alcohol diluted in water.
DO NOT GREASE THE ADJUSTABLE PARTS.
CLEANING AND DISINFECTION OF THE COVERING (padded parts)
Clean the coverings with a soft cloth dipped in water with detergent and a neutral home disinfectant
.
CLEANING THE WHEELS
Clean the wheels at least once a month by keeping them free from waste (threads, hair etc…) which
can stick to them.
CLEANING THE TABLE
Clean the table with a damp sponge dipped in neutral soap diluted in water. After rinsing, dry well with
a soft cloth.
CLEANING THE BASE
Use a soft cloth with water and a mild detergent.
After cleaning, dry thoroughly with a soft cloth.
If you notice any INEFFICIENCY, even partial, of the BRAKES, immediately contact
the reseller where you purchased the product, who will determine whether they need
to be repaired or replaced to avoid dangerous situations that could cause accidents.
Do NOT perform maintenance or replace parts or accessories when the user is sitting
on the device
Intensifie all checks in marine environments, clean more often, anoint the parts ex-
posed to salt corrosion (such as chrome, bolts and screws)