60
Different programming levels are
provided to program the
ARTROMOT
®
-S3 Standard models.
You change between levels by pressing
the
MENU key
repeatedly.
The display always indicates the
currently selected level.
The following
treatment values
,
settings
and
information
can be
entered/viewed on the programming
unit (1):
LEVEL 1:
- Abduction
- Adduction
- Internal rotation
- External rotation
LEVEL 2:
- Pause
- Therapy timer
- Speed
- New patient
LEVEL 3:
- Reverse on load - motor A
- Reverse on load - motor B
- Motor A ON/OFF
- Motor B ON/OFF
LEVEL 4:
- Transport setting
- Synchronized/
non-synchronized mode
- Total therapy time
- Service menu
• To access the programming level you
need, press the
MENU key
repeat-
edly.
• The treatment parameters are selected
with the different
parameter keys
.
• To change the treatment values, press
the
+ / – keys.
• To enable/disable a function, press
the respective
parameter key
again.
• To save the entered values, press the
STOP key
.
■
Abduction
Maximum value:
175 degrees
■
Adduction
Maximum value:
30 degrees
Caution!
Patient hazard
When using the shoulder restraint, be
sure not to program abduction values
greater than 80°.
LEVEL 1:
5.3 Treatment value details –
Standard models
Note!
•
While you adjust the values
, the
carriage will move to the set range.
This allows you to easily and
quickly determine the ROM where
the patient does not experience
pain.
•
Special functions
can be
programmed and retrieved with
ARTROMOT
®
-S3 Comfort
devices
(see sections 5.4 and 5.5).
• The angle entered last for the
respective direction of motion will
be saved in each case.
MENU
MENU
MENU
5.2 Programming
ARTROMOT
®
-S3
Standard