System manual
4
SM0974113 A 01
Figure 1
400
600
Min. 3500 mm
4250 mm
4750 mm
Max. 5000 mm
710
1000
1500
500
500
Good
Best
Dimensions in mm
The SideEye system is a blind
spot collision warning system
designed to supplement other
safety practices and/or devices. The
vehicle operator is always the first
line of defense when safely operating
a vehicle.
The sensor MUST NOT be
installed on the trailer.
2. Mounting Sensor
2.1. Sensor Installation
Before you Begin
Prior to installing the Orlaco SideEye System take time to
familiarize yourself with all of the all documentation, theory
of operation, and system components.
2.2. Sensor Location
The SideEye sensor mounting location is important for
proper system operation. The sensor should be mounted
on the side of the vehicle with the bottom of the radar no
lower than 600 mm) and the top of the radar no more
than 1000 mm above the ground and between 3500 mm
and 5000 mm back from the front edge of the vehicle. The
sensor face should be perpendicular to the ground with
the text up and V logo pointing down. Select a location that
will provide some protection from impact and debris while
allowing an unobstructed view of the target area of interest.
2.3. Sensor Mounting
1.
Select the appropriate location to mount the sensor.
This drawing applies to both a Rigid truck and a Tractor.
The standard mounting configuration is as shown in
Figure 1.
2.
Using the drill template on page 1
0
, scribe position
marks through the holes. Drill 6 mm holes centered on
the marks.
