2
SM0993650 A 01
System Manual
Camera-monitor systems on Linde 115 and
OM Pimespo Thesi series reachtrucks.
Article no. 0401432 A01
Safety
In order to guarantee safe operation, these safety instruc-
tions must be read before you start using this equipment.
• Do not open the enclosure. The camera and the P&T
enclosure are pressurised. This can cause damage, short-
circuiting or electrical shocks.
• Do not expose the equipment to extreme temperatures.
This can cause deformation of the enclosure or damage to
internal components.
• Repairs or adjustments to the equipment may only be
undertaken by Orlaco.
• The equipment must be assembled as shown in this
manual.
• If there have been alterations or changes to this equipment
that have not been specifically approved by Orlaco, use of
this equipment is not permitted.
Preface
Before you start using this equipment, please read this manual carefully
and follow all instructions. This installation manual describes the func-
tions of the equipment, outlines the connection options and explains how
to put the equipment into operation. We recommend that you keep this
manual in a safe place for reference purposes.
If you have any questions or issues concerning the operation of this
equipment, consult the relevant section in the manual or contact the
Orlaco Products BV Service department.
The camera and monitor systems from Orlaco comply with the latest CE,
ADR, EMC and mirror-directive regulations. All products are manufac-
tured in accordance with the ISO 9001 quality management, IATF 16949
quality automotive and ISO 14001 environmental management.
Contents
1.
Introduction
3
2.
Freelift cylinder
3
3.
Top of mast
4
4
. Traverse pulley
4
5.
Installing the camera
6
6.
Overview
7
Available documentation:
DS0963370-0403330 Pulley for cable
DS0963380-0403340 Springset
DS0963371-0404750 Pulley Conversion Kit
DS0961474-0198710 Camera CFMC AMOS 51° PAL
DS0962117-0208902 Monitor RLED 7” RC 4 CS
DS0960043-0301731 Mastcable 15m 4p molded
DS0960043-0304341 Mastcable 5m 4p molded
Fork view system for Linde 115/1120 series consists of:
0403330 Pulley for cable
0403340 Springset
0404750 Pulley Conversion Kit
0198710 Camera CFMC AMOS 51° PAL
0208902 Monitor RLED 7” RC 4 CS
0301731 Mastcable 15m 4p molded
0304341 Mastcable 5m 4p molded
